View Full Version : 32x cable missing?
06-27-2007, 09:51 AM
Could anyone explain the general/cabling setup of the 32x - and where I can pick up any cables I'm missing?
I'm at work so I don't recall sharply as I picked up the 32x last summer and was disappointed that it seemed to be missing a cable. I don't remember if it was something that was Genny to 32x, or a 32x a/v out (or maybe even a third wire? don't remember and the setup seemed strange).
06-27-2007, 11:51 PM
Well here is the basic setup:
- Power adapter which obviously hooks up from your electrical outlet to 32x. I just use a spare adapter from my genny 2 works fine I don't know if there is a different official adapter though.
- A/V cable which hooks from the av out port on your 32x to your tv. Again a spare AV (or rf if thats what your using) for a model 2 works fine.
- 32x Jumper cable that goes from the AV out port on your genny 2 to the AV in port on your 32x.
------If your trying to hook up a 32x to a model 1 genesis your gonna need a separate cable that allows the Jumper cable to hook up with the A/V out port on your model 1.-------
As for replacement cables try the usual suspects: Yard sales, ebay, sega-parts.com may also have something but it is usually cheaper buying one from ebay complete with cables than it is finding the cables individually. Except for the 32x to model 1 cable that will cost you 15 dollars or more usually on ebay unless you get lucky.
Hoped that helped you out a little.
06-28-2007, 10:00 AM
yeah that 32x jumper cable is the one I'm missing... darn. I can use spare model 2 a/v and power supplies no problem though.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.