Search:

Sorry no update on the model 3 yet. I just moved last week and I'm still trying to get all unpacked. As soon as I can I will get some pics put up of the genny 3 board I have and see if we can get...

I just updated the VA7 guide. Thanks to Drakon for pointing out the issue. If anyone has any problems please let me know.

http://retrotimegames.com/ccam.html

Yes there is a small detail in the guide that is wrong. But you don't have to go cutting traces or soldering to via points. Just remove R39. I will update the guide in a little bit.

No I'm still working in this. I plan to try to recap it tomorrow and see what happens. I do believe that it will work with the 32x.

I know that 0ohm resistors are used a lot in hardware. I guess I just never really wondered why. I think I will be making A new board layout soon.



All we really have here is radio shack. They...

That's an awesome idea. I don't know why I never thought of that.

Maybe this would work?? It's quick and ugly but I hope it makes sense.

Use this type of led:
...

That's a nice layout. My very first layout was just larger than a quarter with through hole components but when you make these types of boards at home in larger quantities you are always looking for...

Here:
http://i762.photobucket.com/albums/xx270/memphis343/xeye/DSC00701_zpsf03eabed.jpg
http://i762.photobucket.com/albums/xx270/memphis343/xeye/DSC00700_zpsc6f94d54.jpg...

They all work on my end.

No it's not me and I think my problem is worse. Here are some pics:

6540

6541

6542

Ive tried both outputs and i have caps on order. I will try to get a pic posted tomorrow after work. Ive never seen an issue like this in any genesis.

Oh and it uses a cxa1145

Hey thanks for the reply.
I have just replaced the encoder. Still the same symptoms.

I have an Xeye that seems to work just fine except the video output is completely messed up. You can't make out anything on the screen. It's just a bunch of colors and sprites. The genesis and sega...

Here is all the installation info people should need when installing the ccam with my smd board:
http://retrotimegames.com/ccam.html

I'm still working on the genesis 3 diagram. Unfortunately the...

So there are a few people who want to purchase a ccam pcb from be but they are new members and they are only allowed 1 pm at a time so there inbox is already full. If you are one of those members...

That's what I thought but I can't see where. I traced psg from the pin all the way to the first component, a capacitor. I removed that cap and connected psg to the neg side. There do not seem to be...

Hey guys I need a little help getting the ccam installed into a va7 board as well as a genny 3. I have the connections on the va7 figured out but the psg volume is lower than the rest of the music....

I personally don't care for the look of switches on my systems. I use a switch-less set up. Just hold the reset button to cycle through regions on the genesis.

I forgot to mention to those of you who didn't know but these boards are made literally in my garage and not sent out to a fab house. This is one of the reasons that the board is not as small as I...

Actually I was concerned with size. I would love to have a smaller size board but this was my first go at making my own smd pcb's and using eagle to create the layout. I spent countless hours...

lol, I was kinda thinking the same thing.

Bump. Going on Ebay tonight.

I have found dead roaches and bed bugs in systems. That's way worse than ants lol.