All the mods out there seem to use a model, so I was wondering if a model 1 would work.
Results 1 to 15 of 16
-
10-02-2010, 03:52 PM #1Outrunner
- Join Date
- Aug 2009
- Location
- Canada, Montreal
- Posts
- 532
- Rep Power
- 6
Would it be possible to make a Neptune using a model 1 Genesis
-
10-02-2010, 05:00 PM #2Hero of Algol
- Join Date
- Mar 2009
- Location
- San Jose, CA
- Age
- 23
- Posts
- 9,125
- Rep Power
- 49
Yes.
6 days older than SEGA Genesis
-------------
Originally Posted by evilevoix
-
10-02-2010, 05:06 PM #3Outrunner
- Join Date
- Aug 2009
- Location
- Canada, Montreal
- Posts
- 532
- Rep Power
- 6
Guessing there's more room than the model 2 for add the 32X, right? Originally Posted by kool kitty89
-
10-02-2010, 06:57 PM #4It's Mathmatics Master of Shinobi
- Join Date
- Apr 2010
- Location
- Bannnnnn-bury
- Age
- 29
- Posts
- 1,263
- Rep Power
- 11
the higer dome of the case id imagine should help alot, the whole thing is just alot more 'open'
shouldnt be any limitations in making one with a model 1
-
10-02-2010, 07:01 PM #5Sports Talker
- Join Date
- Apr 2008
- Posts
- 32
- Rep Power
- 0
What's the going rate for a Neptune these days? Still 140?
-
10-02-2010, 07:21 PM #6Outrunner
- Join Date
- Aug 2009
- Location
- Canada, Montreal
- Posts
- 532
- Rep Power
- 6
Don't know but my friend is going to make it for me. Originally Posted by Zeus
-
10-02-2010, 07:52 PM #7Outrunner
- Join Date
- Jul 2009
- Location
- Azeitão - PT
- Age
- 26
- Posts
- 651
- Rep Power
- 7
I made a model1 neptune.
-
10-02-2010, 08:11 PM #8Outrunner
- Join Date
- Aug 2009
- Location
- Canada, Montreal
- Posts
- 532
- Rep Power
- 6
Got any pics? Originally Posted by Jorge Nuno
-
10-02-2010, 08:13 PM #9Outrunner
- Join Date
- Jul 2009
- Location
- Azeitão - PT
- Age
- 26
- Posts
- 651
- Rep Power
- 7
Yep -> http://www.sega-16.com/forum/showpos...5&postcount=42
Old PIC... Now it looks a lot more messy than that
-
10-02-2010, 08:15 PM #10Hero of Algol
- Join Date
- Mar 2009
- Location
- San Jose, CA
- Age
- 23
- Posts
- 9,125
- Rep Power
- 49
The VA7 would give the most room and use the least power (a standard 1.2A model 1 PSU should easily provide power for both given the VA7 is fine with .85A and the 32x is fine with .35A from the Genesis 3 PSU), but especially less heat to dissipate (overheating is a major concern for Neptunes and using a VA7 along with the large model 1 case and no RF shielding should really help).
The main problem is, of course the sound quality of the VA7 without modding... so ideally you'd CCAM that too, otherwise the best stock model 1 would be a VA6.8. (especially with a low power Hitachi HD68HC000)6 days older than SEGA Genesis
-------------
Originally Posted by evilevoix
-
10-02-2010, 08:29 PM #11Outrunner
- Join Date
- Jul 2009
- Location
- Azeitão - PT
- Age
- 26
- Posts
- 651
- Rep Power
- 7
Some VA6s have the Hitachi CMOS processor too, but they're uncommon..
-
10-02-2010, 08:31 PM #12Outrunner
- Join Date
- Aug 2009
- Location
- Canada, Montreal
- Posts
- 532
- Rep Power
- 6
So this is not a pic of a completed Neptune? Originally Posted by Jorge Nuno
Yep -> http://www.sega-16.com/forum/showpos...5&postcount=42
Old PIC... Now it looks a lot more messy than that
-
10-02-2010, 08:38 PM #13Outrunner
- Join Date
- Jul 2009
- Location
- Azeitão - PT
- Age
- 26
- Posts
- 651
- Rep Power
- 7
It is, it's just that now it has more circuitry stuffed into there.
-
10-02-2010, 08:52 PM #14Outrunner
- Join Date
- Aug 2009
- Location
- Canada, Montreal
- Posts
- 532
- Rep Power
- 6
Why put more? Originally Posted by Jorge Nuno
-
10-02-2010, 09:07 PM #15Outrunner
- Join Date
- Jul 2009
- Location
- Azeitão - PT
- Age
- 26
- Posts
- 651
- Rep Power
- 7
For scaling the video to 1920x1080 so I can play MD/32x on my monitor.
In other words, working on MD never ends (), I have a future plan for it (after I finish the ram cartridge and the video scaler).
Reply With Quote
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
