Quantcast

Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: Build a Scart Distribution Box for Gaming Room

  1. #16
    Road Rasher
    Join Date
    Mar 2010
    Posts
    308
    Rep Power
    16

    Default

    you don't need the last CBT3245, you just connect the bus to the output socket. It's one chip per input.
    Composite video / sync on the output needs to be on pin 19 (if you're using a female socket and use a male-male scart)

  2. #17
    Road Rasher dadou's Avatar
    Join Date
    Mar 2010
    Age
    32
    Posts
    278
    Rep Power
    11

    Default

    You are right Ryoandr,

    I fixed the schematic:



    Full Size Link: https://i62.servimg.com/u/f62/15/89/02/41/scart_12.gif

    Do i need to connect Pin 21 from the Scart socket to 0V?
    Last edited by dadou; 05-12-2018 at 03:46 PM.

  3. #18
    Road Rasher
    Join Date
    Mar 2010
    Posts
    308
    Rep Power
    16

    Default

    Yes. Personally I would connect all grounds together.

  4. #19
    Hedgehog-in-Training Hedgehog-in-Training
    Join Date
    Apr 2018
    Posts
    2
    Rep Power
    0

    Default

    Sorry about the necro bump, but @dadou schematic is wrong. If A1 is RED, B1 should be RED, not B7 and the same for the next signals.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •