Quantcast

Search:

Type: Posts; User: retrogamer343

Page 1 of 16 1 2 3 4

Search: Search took 0.03 seconds; generated 41 minute(s) ago.

  1. Sega CDX Laser replacement random tiny spring.

    Went to replace my CDX laser and I can't seem to figure out were this tiny spring is supposed to go. Any help would be much appreciated. I've been searching for over an hour for at least a decent...
  2. Thanks for that info. I'm actually all out of...

    Thanks for that info. I'm actually all out of those caps and need to order some more. Hopefully they will be the correct rating. Unfortunately my hearing is not good and I cannot distinguish or even...
  3. Just so everyone is aware the filtering caps used...

    Just so everyone is aware the filtering caps used on my ccam are indeed .022uf. The board is built off of Tiido's schematic with nothing changed at all. The only possibility might be that I was sent...
  4. Sticky: I do the mods for you if you need....

    I do the mods for you if you need. http://retrotimegames.com/ccam.html
  5. For Sale: Sega CDX and modified top loader nes for sale

    I have a CDX in great condition but its missing the battery cover. Console only, no power, av or controllers.

    I also have a top loading nes that has been modified to take a snes plug for av...
  6. Replies
    20
    Views
    9,878

    If it helps I have just come into possession of a...

    If it helps I have just come into possession of a 3rd party av cable. When I first tried it with my console it did not show av at all. It turns out that the cable was just very tight fitting. I had...
  7. Replies
    10
    Views
    1,296

    I'll hook you up with one for like $7 shipped?...

    I'll hook you up with one for like $7 shipped? Just pm me if you want one.
  8. Sticky: It takes about an hour and a half or so to make...

    It takes about an hour and a half or so to make the blank pcb. I can do 6 blanks at a time on a 4x6 piece of copper clad. Then about a half hour to populate each with components and test. And no...
  9. Sticky: Here is the new board if anyone is interested. ...

    Here is the new board if anyone is interested.

    http://i762.photobucket.com/albums/xx270/memphis343/New%20CCAM%206-20-13/005_zpsdf9533f2.jpg

    And compared to the original design:
    ...
  10. Oh I see.

    Oh I see.
  11. Sticky: Not sure if you've seen my reference page but...

    Not sure if you've seen my reference page but here is a link if it helps:

    http://retrotimegames.com/ccam.html

    there are diagrams for the va7 install.

    Also I have a new board design if...
  12. LOL, Just get a va7 model 1.

    LOL,
    Just get a va7 model 1.
  13. For Sale: Yea I also tried the rom swap. Still did not...

    Yea I also tried the rom swap. Still did not work. I'm pretty positive it's an issue with the rom itself. If I remember correctly I used a sonic spinball cart as a doner. It was to correct rom type....
  14. Replies
    0
    Views
    635

    For Sale: Random games for sale

    Here is what I have available:

    Sega CD
    Ecco the tides of time (Case has a small smudge on the front. Looks like it was cleaned with a chemical. Overall good shape)
    Tomcat Alley (Both tabs are...
  15. For Sale: I also have a bad moonwalker. Does the same...

    I also have a bad moonwalker. Does the same thing, just a black screen. I tried the cap and resistor replacement as well as some other tricks and nothing. I think it must be a common issue with this...
  16. Sticky: Sorry no update on the model 3 yet. I just moved...

    Sorry no update on the model 3 yet. I just moved last week and I'm still trying to get all unpacked. As soon as I can I will get some pics put up of the genny 3 board I have and see if we can get...
  17. Sticky: I just updated the VA7 guide. Thanks to Drakon...

    I just updated the VA7 guide. Thanks to Drakon for pointing out the issue. If anyone has any problems please let me know.

    http://retrotimegames.com/ccam.html
  18. Sticky: Yes there is a small detail in the guide that is...

    Yes there is a small detail in the guide that is wrong. But you don't have to go cutting traces or soldering to via points. Just remove R39. I will update the guide in a little bit.
  19. Replies
    27
    Views
    9,392

    No I'm still working in this. I plan to try to...

    No I'm still working in this. I plan to try to recap it tomorrow and see what happens. I do believe that it will work with the 32x.
  20. Sticky: I know that 0ohm resistors are used a lot in...

    I know that 0ohm resistors are used a lot in hardware. I guess I just never really wondered why. I think I will be making A new board layout soon.



    All we really have here is radio shack. They...
  21. Sticky: That's an awesome idea. I don't know why I never...

    That's an awesome idea. I don't know why I never thought of that.
  22. Maybe this would work?? It's quick and ugly but I...

    Maybe this would work?? It's quick and ugly but I hope it makes sense.

    Use this type of led:
    ...
  23. Sticky: That's a nice layout. My very first layout was...

    That's a nice layout. My very first layout was just larger than a quarter with through hole components but when you make these types of boards at home in larger quantities you are always looking for...
  24. Replies
    27
    Views
    9,392

    Here:...

    Here:
    http://i762.photobucket.com/albums/xx270/memphis343/xeye/DSC00701_zpsf03eabed.jpg
    http://i762.photobucket.com/albums/xx270/memphis343/xeye/DSC00700_zpsc6f94d54.jpg...
  25. Replies
    27
    Views
    9,392

    They all work on my end.

    They all work on my end.
Results 1 to 25 of 376
Page 1 of 16 1 2 3 4